|
|
Are used for prevention, therapy, rehabilitation and conditioning of the musculoskeletal system
|
|
|
Are employed in physiotherapy practices, rehabilitation clinics, fitness and research centers
|
|
|
Are also used in occupational medicine, sports medicine and military medicine
|
|
|
Enable precise diagnostic statements. Our products save time
and space and are easy to handle
|
|
|
Are based on concepts and results derived from more than 20 years of competitive sports research
|
|
|
Incorporate the experience of almost 15 years of production of devices for professional application
|
|
|
Are currently in use in eleven countries in Europe and Asia
|
|
|
Are worldwide unique in functionality, design and quality
|
|
Product
|
Description
|
CTT CENTAUR
|
CTT CENTAUR is a three-dimensional, active (i.e., self-moving),
computer-supported test and training (CTT) device system for the spine-stabilizing musculature.
Equipped with the BioMC software the CTT CENTAUR enables
|
|
Identification of neuromuscular imbalances in the lumbar spine segment and a
targeted training to reduce existing neuromuscular imbalances and deficits.
For the first time a targeted spatial training of the deeper lying (autochthonous)
musculature becomes possible. This is accomplished by a controlled activation of the
autochthonous back musculature, which is initiated by the gravitational force of the earth -
Instrumental proprioceptive neuromuscular facilitation (PNF).
|
|
|
Functional training (treatment) to reduce and prevent neuromuscular imbalances and deficits
by creating a synergetic strain of the balance analyzer and the sensorimotor systems of the lumbar, thoracic and
cervical spine motor function
|
|
|
Networking of the device and storage of data on smart cards for
an efficient execution of tests and training
|
You can find additional information under
[Downloads]
|
|
Product
|
Description
|
CTT PEGASUS
|
CTT PEGASUS is a three-dimensional,
computer-supported test and training (CTT) device system for the spine-stabilizing musculature.
Equipped with the BioMC software the CTT PEGASUS enables
|
|
Measurement of the range of motion of the spine, especially in the thoracic
and lumbar segments. The measurement can be conducted simultaneously or successively
in the anatomic planes.
That way, it is possible to objectify existing deficits of the range of motion, define treatment targets and
document the recovery progress
|
|
|
Measurement of the exertion of strength in any measuring point of the
anatomic planes of the thoracic and lumbar spine joint motor function.
Any specific measuring point is exactly reproducible. The
measuring position can be locked, the measured values (of the chosen effective directions) are stored
and displayed as polar (radar) and column charts.
|
|
|
Execution of a specific training (treatment) of the sensorimotor systems
of the thoracic and lumbar spine joint motor function under isometric and isotonic (auxotonic)
working conditions. The training aims at reducing existing muscular imbalances and deficits
and at restoring and improving the natural range of motion and resilience of the spine in those segments
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
You can find additional information under
[Downloads]
|
|
Product
|
Description
|
|
CTT MINOTAUR
|
CTT MINOTAUR is a computer-supported test and training system for the musculature
of the neck and the back.
Equipped with the BioMC software the CTT MINOTAUR enables
|
|
Measurement of the range of motion of the cervical spine in the transversal plane.
That way, it is possible to objectify existing deficits of the range of motion, define treatment targets and
document the recovery progress
|
|
|
Measurement of the exertion of strength of the musculature of
the cervical spine in the anatomic main planes (in arbitrary measuring positions in the transversal plane).
Any specific measuring point is exactly reproducible. The
measuring position can be locked, the measured values (of the chosen effective directions) are stored
and displayed as polar (radar) charts
|
|
|
Measurement of the exertion of strength of the joint motor function
of the thoracic and lumbar spine segment in an upright sitting position
|
|
|
Execution of a specific training (treatment) of the sensorimotor systems
of the cervical spine joint motor function under isometric and isotonic (auxotonic)
working conditions. The training aims at reducing existing muscular imbalances and deficits and at restoring and improving
the natural range of motion and resilience of the spine in that segment
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
|
|
Product
|
Description
|
|
CTT KOLOSSOS
|
CTT KOLOSSOS is a computer-supported test and training system for
the spine joint motor function.
Equipped with the BioMC software the CTT KOLOSSOS enables
|
|
Measurement of the exertion of strength of
the thoracic and lumbar spine joint motor function in the anatomic main planes
in an upright sitting position.
The measured values (of the chosen effective directions) are stored
and displayed as column charts.
|
|
|
Execution of a specific training (treatment) of the sensorimotor systems
of the thoracic and lumbar spine joint motor function under isometric
working conditions. The training aims at reducing existing muscular imbalances and deficits and
at restoring and improving the natural resilience of the spine in that segment
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
|
|
Product
|
Description
|
CTT IKARUS
|
CTT IKARUS is a three-dimensional, computer-supported shoulder simulator.
Equipped with the BioMC software the CTT IKARUS enables
|
|
Measurement of the range of motion of the shoulder joints (left/right, simultaneous or
successively) in the different anatomic planes
|
|
|
Measurement of the exertion of strength of the musculature of
the shoulder in any measuring position of the anatomic planes of the shoulder joints.
Any specific measuring point is exactly reproducible. The
measuring position can be locked, the measured values (of the chosen effective directions) are stored
and displayed as polar (radar) charts
|
|
|
Execution of a specific training (treatment) of the sensorimotor systems
of the shoulder joints under isometric and isotonic (auxotonic)
working conditions. The training aims at reducing existing muscular imbalances and deficits and
at restoring and improving the natural range of motion and resilience of the shoulder
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
You can find additional information under
[Downloads]
|
|
Product
|
Description
|
|
CTT isoLegPress TITAN
|
CTT isoLegPress TITAN is available as an active (i.e., self-moving) and/or passive
leg press with computer-supported measuring and positioning system.
Equipped with the BioMC software the CTT isoLegPress TITAN enables
|
|
Measurement of the exertion of strength of the lower limbs in any angle and position,
respectively (left/right, simultaneously or successively)
|
|
|
Positioning in exactly reproducible measuring points and
display of the stored strength values as characteristic curves
|
|
|
Execution of a biofeedback training (treatment) of the lower limbs (foot, knee, hip joints)
under isotonic (auxotonic), isokinetic and isometric working conditions
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
You can find additional information under
[Downloads]
|
|
Product
|
Description
|
CTT BalancePlatform ATLAS
|
CTT BalancePlatform ATLAS is a combination of a balance platform and
a knee bend ergometer.
Equipped with the BioMC software the CTT BalancePlatform ATLAS enables
|
|
Determination of the distribution of the body weight onto the legs.
Thereby, an early diagnosis of the cause of potential future postural deformities and of
increased wear of the joints (knee, hip and spine) becomes possible
|
|
|
Execution of a balance test, which allows to determine the performance of the concerned
sensorimotor function by comparing the calculated and actual center of gravity of the body
|
|
|
Execution of different training programs:
Training to equally distribute the body weight onto both legs in the standing position; conscious control of
the center of gravity of the body; strength endurance - biofeedback training of the sensorimotor function of
foot, knee and hips (knee bend ergometer)
|
|
|
Networking of the device and storage of data for
an efficient execution of tests and training
|
|
|
Product
|
Description
|
CTT BiofeedbackMotorControl Unit
|
The CTT BiofeedbackMotorControl Unit consists of measuring modules
(for the measurement of strength and/or motion) and the BioMC PC software.
The product enables the easy and quick upgrade of the majority of common sequence training machines
to computer-supported test and training systems for the medical training therapy (MTT).
You can find additional information under
[Downloads]
|
|
Product
|
Description
|
TrainingNavigator TNS
|
TrainingNavigator TNS consists of a measuring module (for the measurement of motion) and
a mini computer with integrated display. The computer is able to execute a special version of the
BioMC software. The product is used to easily and quickly upgrade the majority of
common sequence training devices to computer-supported test and training systems for fitness and sports.
|
|
Product
|
Description
|
CTT GUT WRENCH MACHINE
|
CTT GUT WRENCH MACHINE is a test and training device that was developed specifically for
use in competitive sports.
The machine is used for a computer-supported training of the specific abilities with regard to strength and
coordination that are required in wrestling to perform the gut wrench technique.
You can find additional information under
[Downloads]
|